Specialist 400 Series
Grede: We are Stockist, Dealer, Exporters & Supplier of Ferrous & Non-Ferrous Metals in all Sizes, Shapes in SS 400 Seires . We have a good service of Co-Ordination , Quality & Punctuality . We are one of largest Stockist in Mumbai. Here is Our brief description of material we Deals in:Stainless Steel : Sheets , Plates , Coils , Pipes , Flats , Circles , Rounds & wires ,
Brands : - Jindal stainless ltd , SAIL: Steel Authority of India Limited , Columbus Stainless (Pty) Ltd , POSCO , Aperam Stainl
SS Sheets thickness 0.8 mm to 100 mm ,
405 ,409 , 409L , 409M , X2Cr11 , X2CRNi12 , IRSM- 44/97 , 1.4003 ,3CR12 , 3CR12L , 410 , 410S , 441 ,415 , 41500
(ASTM 41500) , UNS (41500), 420 ,420J1 , 420J2 , 430 , 431 , 446
Grades |
%C |
%Mn |
%P |
%S |
%Si |
%Cr |
%Ni |
%Mo |
N PPM |
%Others |
405 |
0.080 |
1.000 |
0.040 |
0.030 |
1.000 |
11.50-14.50 |
0.6 |
- |
- |
AI - 0.10-0.30 |
409 |
0.030 |
1.000 |
0.040 |
0.020 |
1.000 |
10.50-11.70 |
0.50 max |
Ti -6X (C+N) Min., 0.5 Max. |
||
409L |
0.030 |
1.000 |
0.040 |
0.030 |
1.000 |
10.50-11.70 |
0.50 max |
- |
300 |
Ti =6X (C+N) Min., 0.75 Max. |
409M |
0.030 |
0.8-1.5 |
0.030 |
0.030 |
1.00 |
10.80-12.50 |
1.50 max |
- |
300 |
Ti=0.75 max |
410 |
0.08-0.15 |
1.00 |
0.04 |
0.03 |
1.00 |
11.50-13.50 |
0.75 max |
- |
- |
- |
410S |
0.080 |
1.000 |
0.040 |
0.030 |
1.000 |
11.50-13.50 |
0.60 max |
- |
||
415 |
0.05 |
0.50-1.00 |
0.030 |
0.030 |
0.600 |
11.50-14.00 |
3.50-5.50 |
0.50-1.00 |
- |
- |
420 |
0.15 min |
1.00 |
0.040 |
0.030 |
1.00 |
12.00-14.00 |
0.75 max |
0.50 max |
- |
- |
430 |
0.120 |
1.000 |
0.040 |
0.030 |
1.00 |
16.00-18.00 |
0.75 max |
- |
||
431 |
0.200 |
1.000 |
0.040 |
0.030 |
1.00 |
15.00-17.00 |
1.25-2.50 |
- |
- |
- |
430Ti |
0.030 |
1.000 |
0.040 |
0.030 |
1.00 |
16.00-19.00 |
- |
- |
Ti - 0.10-1.00 |
|
436 |
0.120 |
1.000 |
0.040 |
0.030 |
1.00 |
16.00-18.00 |
0.75-1.25 |
Nb= 5XC Min., 0.70 Max. |
||
436L |
0.025 |
1.000 |
0.040 |
0.030 |
1.00 |
16.00-19.00 |
- |
0.75-1.25 |
250 |
% Nb or & Ti or °/0 combination= 8X (C+N) Min., 0.80 Max. |
439 |
0.030 |
1.000 |
0.040 |
0.030 |
1.00 |
17.00-19.00 |
0.50 max |
- |
300 |
Ti-0.20+4X (C+N) Min.,1.10 Max. AJ= 0.15 Max. |
441 |
0.030 |
1.000 |
0.040 |
0.015 |
1.00 |
17.50-18.50 |
- |
Nb= 3X% C+0.3 Min.I % Max., TI = 0.1-0.6% |
| Element% | X2CrNi12(1.4003) EN 10088 - 2 ASTM S40977 | DIN 5512 Part 3 X2Cr11 | IR CK – 201 X2CrNi12 (409M) 2002 | IRS M 44/97 |
| Carbon Manganese Phosphorous Sulphur Silicon Chromium Nickel Nitrogen Titanium |
0.03 max 1.50 max 0.04 max 0.015 max 1.0 max 10.5 – 12.5 0.3 – 1.0 0.03 max Nil |
0.03 max 0.5 – 1.5 0.04 max 0.015 max 1.0 max 10.5 – 12.5 0.3 – 1.0 0.03 max Nil |
0.03 max 0.5 – 1.5 0.04 max 0.03 max 1.0 max 10.5 – 12.5 0.3 – 1.0 0.03 max Nil |
0.03 max 0.8 - 1.5 0.03 max 0.03 max 1.0 max 10.8 – 12.5 1.5 max Nil 0.75 max |
| Jindal Designation/code | Tensile Strength (MPA)min. | %Yield Strength(MPA)min. | %Elongation(min.) | Hardness (HRB)max. |
|---|---|---|---|---|
| Martensitic | ||||
| J-405 | 415 | 170 | 20 | 86 |
| J-409 | 380 | 170 | 20 | 88 |
| J-409L | 380 | 170 | 20 | 88 |
| J-410S | 415 | 205 | 22 | 89 |
| J-430 | 450 | 205 | 22 | 89 |
| J-43OTi | 360 | 175 | 22 | 90 |
| J-436 | 360 | 175 | 22 | 90 |
| J-436L | 360 | 175 | 22 | 90 |
| J-439 | 415 | 205 | 22 | 89 |
| J-409M | 415 | 205 | 22 | 89 |
| J-2205 | 655 | 450 | 25 | 31 (HRC) |
| J-2304 | 600 | 450 | 25 | 32 (HRC) |
| Property | X2CrNi12(1.400 3) EN 10088 - 2 ASTM S40977 | DIN 5512 Part 3 X2Cr11 | IR CK – 201 X2CrNi12 (409M) 2002 | IRS M44/97 |
| Yield Strength (MPa) | 280/320 | 320 | 320 | 350 - 450 |
| Tensile Strength (MPa) | 450 - 650 | 450 - 600 | 450 – 650 | 500 |
| Percentage Elongation | 20 | 18 - 20 | 20 | 25 |